Philips Q552.2L Specifikace stáhnout pdf (Strana 46)

Alignments

EN 46 Q552.2L LA6.

2011-Jul-15

back to

div. table

Note

1). Example

6.5 Reset of Repaired SSB

A very important issue towards a repaired SSB from a Service

repair shop (SSB repair on component level) implies the reset

of the NVM on the SSB.

A repaired SSB in Service should get the service Set type

“00PF0000000000” and Production code “00000000000000”.

Also the virgin bit is to be set. To set all this, you can use the

ComPair tool or use the “NVM editor” and “Dealer options”

items in SAM (do not forget to “store”).

After a repaired SSB has been mounted in the set (set repair

on board level), the type number (CTN) and production code of

the TV has to be set according to the type plate of the set. For

this, you can use the NVM editor in SAM. This action also

ensures the correct functioning of the “Net TV” feature and

access to the Net TV portals. The loading of the CTN and

production code can also be done via ComPair (Model number

programming).

After a SSB repair, the original channel map can be restored,

provided that the original channel map was stored on a USB

stick before repair was commenced and that basic functionality

of the TV, needed for this procedure, was not hampered as a

result of the defect. The procedure of “channel map cloning” is

clearly described in the (electronic) user manual.

In case of a display replacement, reset the “Operation hours

display” to “0”, or to the operation hours of the replacement

display.

6.5.1 SSB identification

Whenever ordering a new SSB, it should be noted that the

correct ordering number (12nc) of a SSB is located on a sticker

on the SSB. The format is <12nc SSB><serial number>. The

ordering number of a “Service” SSB is the same as the ordering

number of an initial “factory” SSB.

6.6 Total Overview SAM modes

Table 6-11 SAM mode overview

Bit 2 4 HBBTV

0 = OFF

1 = ON

Bit 1 2 DVB-T2 Installation

0 = OFF

1 = ON

Bit 0 (LSB) 1 DVB-T2

0 = OFF

1 = ON

Option & Bit Dec. Value Option Name

Prescribed Value

Description

18310_221_090318.eps

090319

Main Menu Sub-menu 1 Sub-menu 2 Sub-menu 3 Description

Hardware Info A. SW version e.g. “Q5551_0.9.1.0 Display TV & Stand-by SW version and CTN serial

number

B. Stand-by processor version e.g. “STDBY_83.84.0.0”

C. Production code e.g. “see type plate”

Operation hours Displays the accumulated total of operation hours.TV

switched “on/off” & every 0.5 hours is increase one

Errors Displayed the most recent errors

Reset error buffer Clears all content in the error buffer

Alignment White point Colour temperature Normal 3 different modes of colour temperature can be

selected

Warn

Cool

White point red LCD White Point Alignment. For values,

see Table 6-3 White tone default setting 32" sets

(Blockbuster)

White point green

White point blue

Ambilight Select module

Brightness

Select matrix

Dealer options Virgin mode Off/On Select Virgin mode On/Off. TV starts up / does not

start up (once) with a language selection menu after

the mains switch is turned “on” for the first time (virgin

mode)

E-sticker Off/On Select E-sticker On/Off (USP’s on-screen)

Auto store mode None

PDC/VPS

TXT page

PDC/VPS/TXT

Option numbers Group 1 e.g. “00008.00001.15421.02239” The first line (group 1) indicates hardware options 1

to 4

Group 2 e.g. “44816.34311.33024.00000” The second line (group 2) indicates software options

5 to 8

Store Store after changing

Initialise NVM N.A.

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 178 179

Komentáře k této Příručce

Žádné komentáře

Philips Q552.2L Specifikace Strana 46

Komentáře k této Příručce

Související produkty a manuály pro Televizory a monitory Philips Q552.2L