Philips Q552.2L Specifikace stáhnout pdf (Strana 42)

Alignments

EN 42 Q552.2L LA6.

2011-Jul-15

back to

div. table

If you do not have a color analyzer, you can use the default

values. This is the next best solution. The default values are

average values coming from production.

• Select a COLOUR TEMPERATURE (e.g. COOL,

NORMAL, or WARM).

• Set the RED, GREEN and BLUE default values according

to the values in Table 6-3

• When finished press OK on the RC, then press STORE (in

the SAM root menu) to store the aligned values to the NVM.

• Restore the initial picture settings after the alignments.

Table 6-3 White tone default setting 32" sets (Blockbuster)

Table 6-4 White tone default setting 40" sets (Blockbuster)

Table 6-5 White tone default setting 32" sets (Emmy)

Table 6-6 White tone default setting 40" sets (Emmy)

Table 6-7 White tone default setting 46" sets (Emmy)

Table 6-8 White tone default setting 42" sets (Sundance)

Table 6-9 White tone default setting 47" sets (Sundance)

6.4 Option Settings

6.4.1 Introduction

The microprocessor communicates with a large number of I

ICs in the set. To ensure good communication and to make

digital diagnosis possible, the microprocessor has to know

which ICs to address. The presence / absence of these

PNX51XX ICs (back-end advanced video picture improvement

IC which offers motion estimation and compensation features

(commercially called HDNM) plus integrated Ambilight control)

is made known by the option codes.

Notes:

• After changing the option(s), save them by pressing the OK

button on the RC before the cursor is moved to the left,

select STORE in the SAM root menu and press OK on the

RC.

• The new option setting is only active after the TV is

switched “off” / “stand-by” and “on” again with the mains

switch (the NVM is then read again).

6.4.2 Dealer Options

For dealer options, in SAM select “Dealer options”.

See Table 6-11 SAM mode overview

6.4.3 (Service) Options

From 2011 onwards, it is not longer possible to change

individual option settings in SAM. Options can only be changed

all at once by using the option codes as described in section

6.4.4

6.4.4 Opt. No. (Option numbers)

Select this sub menu to set all options at once (expressed in

two long strings of numbers).

An option number (or “option byte”) represents a number of

different options. When you change these numbers directly,

you can set all options very quickly. All options are controlled

via eight option numbers.

When the NVM is replaced, all options will require resetting. To

be certain that the factory settings are reproduced exactly, you

must set both option number lines. You can find the correct

option numbers on a sticker inside the TV set.

Example: The options sticker gives the following option

numbers:

• 08192 00133 01387 45160

• 12232 04256 00164 00000

The first line (group 1) indicates hardware options 1 to 4, the

second line (group 2) indicate software options 5 to 8.

Every 5-digit number represents 16 bits (so the maximum value

will be 65536 if all options are set).

When all the correct options are set, the sum of the decimal

values of each Option Byte (OB) will give the option number.

Diversity

Not all sets with the same Commercial Type Number (CTN)

necessarily have the same option code!

Use of Alternative BOM => an alternative BOM number usually

indicates the use of an alternative display or power supply. This

results in another display code thus in another Option code.

Refer to Chapter 2. Technical Specifications, Diversity, and

Connections.

6.4.5 Option Code Overview

Refer to the sticker in the set for the correct option codes.

Important: after having edited the option numbers as

described above, you must press OK on the remote control

before the cursor is moved to the left!

White Tone e.g. 32PFL6606/xx

Colour Temp R G B

Normal t.b.d. t.b.d. t.b.d.

Cool t.b.d. t.b.d. t.b.d.

Warm t.b.d. t.b.d. t.b.d.

White Tone e.g. 40PFL6606/xx

Colour Temp R G B

Normal 117 127 95

Cool 113 127 111

Warm 126 125 60

White Tone e.g. 32PFL7606/xx

Colour Temp R G B

Normal 112 127 85

Cool 106 127 100

Warm 125 126 53

White Tone e.g. 40PFL7606/xx

Colour Temp R G B

Normal 115 127 84

Cool 111 127 99

Warm 125 127 49

White Tone e.g. 46PFL7606/xx

Colour Temp R G B

Normal 124 127 98

Cool 120 127 121

Warm 127 121 58

White Tone e.g. 42PFL8606/xx

Colour Temp R G B

Normal 125 125 127

Cool 106 108 127

Warm 127 110 79

White Tone e.g. 47PFL8606/xx

Colour Temp R G B

Normal t.b.d. t.b.d. t.b.d.

Cool t.b.d. t.b.d. t.b.d.

Warm t.b.d. t.b.d. t.b.d.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 178 179

Komentáře k této Příručce

Žádné komentáře

Philips Q552.2L Specifikace Strana 42

Komentáře k této Příručce

Související produkty a manuály pro Televizory a monitory Philips Q552.2L