Philips V26CT Uživatelský manuál stáhnout pdf (Strana 227)

100

101

Loading Paper

Recording Functions 6-55

Note—The first sheet will come out folded, as shown.

Cleaning the

Roller on

the Four

Channel

(M1117A)

Recorder

If the paper doesn’t move through the roller properly, a possible cause is

that the roller needs to be cleaned. (Be sure your hands are clean before

touching the roller).

Equipment

Required

• Lint-free cloths or wipes

• Alcohol solvent that is low in water content. We recommend either

reagent grade denaturated ethanol or isopropanol (90% rather than

70%)

Directions 1. Turn the power off.

2. Open the door and remove any paper from the recorder.

3. Wipe the visible part of the roller with a saturated (but not dripping)

cloth. Rotate the roller with clean fingertips to expose the entire

surface and wipe the other side.

4. Remove any excess liquid by wiping with a dry cloth.

Caution

The roller must be completely dry before using the recorder or you can

permanently damage the recording mechanism.

Step 3 Close the door. The paper should feed

automatically.

1 2 ... 222 223 224 225 226 227 228 229 230 231 232 ... 391 392

Komentáře k této Příručce

Žádné komentáře

Philips V26CT Uživatelský manuál Strana 227

Komentáře k této Příručce