Philips MP60/70/80/90 Uživatelský manuál stáhnout pdf (Strana 169)

100

101

149

11Monitoring Temperature

You can measure temperature using the Multi-Measurement Server (MMS), one of the measurement

server extensions, or the temperature plug-in module. Temp measurement automatically switches on

when you connect a probe. You can switch the measurement off manually.

Making a Temp Measurement

1 Select the correct type and size of probe for your patient.

2 If you are using a disposable probe, connect the probe to the temperature cable.

3 Plug the probe or temperature cable into the temperature connector socket.

4 Apply the probe to the patient. You are advised to use a protective rubber cover on rectal probes.

5 Select an appropriate temperature label.

6 Check that the alarm settings (on or off, high and low limits) are appropriate for this patient and

this type of temperature measurement.

WARNING Make sure you set alarm limits for the correct label. The alarm limits you set are stored for that

particular label only. Changing the label may change the alarm limits.

Selecting a Temperature for Monitoring

Tell the monitor which temperature you want to monitor by selecting its temperature label. The label

is a unique identifier for each type of temperature. When you choose a label, the monitor uses that

label’s stored color and alarm settings.

1 In the Setup <Temp> menu, select Label.

2 Select the appropriate label from the list.

Temp connector socket

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 413 414

Komentáře k této Příručce

Žádné komentáře

Philips MP60/70/80/90 Uživatelský manuál Strana 169

Komentáře k této Příručce

Související produkty a manuály pro Měření, testování a kontrola Philips MP60/70/80/90